IDLS - Intelligent Dome Light System
Product No. 262004 - Technical Specifications
Rectangular Dome Light with Backup Battery Functionality - Description
The IDLS LED based dome light is designed to provide general purpose illumination within armored vehicles, suitable as retrofit with MS51073 dome light.
Two operation modes are available, WHITE light mode and BLUE light mode.
The design utilizes solid state technology and a constant current drive circuit to achieve a consistent and economical light output at an input range of 16...33VDC.
The IDLS control circuitry is based on a microcontroller which controls all functionalities of the module.
Operation mode is selectable by a 3 state toggle switch with a lockout lever.
Light intensity is controllable from 1% to 100%.
The product is designed to meet the rigorous requirements of military ground vehicle environments.
Features
* Two light colors available – White and Blue selectable through a toggle switch.
* Simple mounting –Mounted by 4 screw holes located in the product base.
* Receptacle type – The unit utilizes one pin receptacle NSN 5935-00-622-4948.
* Backup battery – Active while mains are disconnected or during vehicle power supply failure event.
* White illumination – At a distance of 1m from target, the lamp provides a main illumination footprint in
an area larger than 1m x 1m, with a value greater than 45Lux on 0-0 axis dropping to 25Lux at the edges.
* Dimming control – dimming is enabled by a potentiometer.
* Vehicle’s battery monitoring – When the vehicle’s battery voltage falls below a predetermined value
(21.5V) the system automatically shifts to low voltage visual alert.
Product No. 26 2004 – Datasheet |
Light Output - White / Blue |
Input Voltage |
16-33VDC |
Input Current |
200mA |
Power Consumption |
4.8 Watts |
Input Over Voltage Protection |
Included |
Input Reverse Voltage Protection |
Included |
Built-In EMI RFI Filter, Low Noise |
MIL-STD-461E |
Light Source |
LEDs |
White Light Output (at 1 meter) |
Minimum 45 Lux @ Center |
Blue Light Output (at 1 meter) |
Minimum 8 Lux @ Center |
Dominant Wavelength (Blue) |
465nm |
Light Beam Angle |
100° |
Intensity Control (White & Blue) |
1-100% |
Operating Temperature Range |
-40°C to +71°C |
Dimensions (L x W x H) mm (inch) |
175 (6.9) x 150 (5.9) x 51 (2.00) |
Weight |
|
Receptacle Pin-out:
|
Functional |
PIN |
(+) 28VDC |
Body |
(–) Return |
Remark:
Return is achieved by connecting 4 supporting base holes to vehicle's chassis.